Calculate ESP32 deep sleep runtime from sleep current, wake time, wake interval and battery capacity.
This ESP32 calculator helps estimate real-world power, battery, brownout and regulator behavior for IoT and embedded projects.
Enter your ESP32 current, battery, regulator or wiring values. The calculator returns practical estimates for design decisions.
Useful for ESP32-WROOM, ESP32-S3, ESP32-C3, WiFi sensors, battery devices, solar nodes and IoT prototypes.
Always verify with the ESP32 module datasheet, regulator datasheet and real current measurements because WiFi peaks and sleep current vary by board.
ESP32 current depends heavily on WiFi, CPU frequency, board design and sleep mode. WiFi peaks can be several hundred milliamps.
Brownout usually happens when the regulator, USB cable, battery or capacitor cannot support ESP32 peak current during WiFi activity.
Use deep sleep, reduce wake time, lower WiFi usage, choose a low quiescent-current regulator and measure real current.
The ESP32 Deep Sleep Runtime Calculator is used for quick engineering estimates and early design checks. Always verify final values with datasheets, measurements and real operating conditions.
The result is an estimate based on the entered values and formulas. Real circuits can differ because of tolerances, temperature, PCB layout, losses and component limitations.
Check component ratings, voltage and current limits, thermal margin, layout, safety requirements and real measurements under load.
Runtime can be lower because of regulator losses, battery voltage sag, temperature, cutoff voltage, aging and peak current demand.
Average current is usually the most important value for runtime, especially in sleep-heavy IoT devices.